contact us  l  feedback

Home  l  Company  l  Products  l  Technical Info.  l  Press Release  l  Investor Relations  l  Distributors

  Home

  Company
  Products
     Instruments
     Modules
    Polarization Management
    Time/Delay Management
     Components
    Polarization Components
    Other Passive
    1060nm Components
    Accessories
  Technical Info.
  Press Release
  Investor Relations
  Distributor
  Feedback
  Contact Us
back to: Modules > Polarization Management > High Speed Polarization State Generator
         High Speed polarization state generator
Product Summary

General Photonics’ high-speed polarization state generator (PSG) module provides the ability to generate 6 states of polarization (-45°, 0°, 45°, 90°, RHC & LHC) across the Poincaré Sphere in less than 250 μs, with an impressive repeatability of less than 0.1 degrees. In addition, it comes as a compact module ideal for integration into systems that require precise generation of these 6 polarization states or precise 90° polarization rotation. Applications include Mueller matrix-based measurements, polarization OTDR, performance monitoring, and swept frequency component measurement systems. The PSG is easily controlled with a 6-bit TTL signal either from a microcontroller or a computer.


Features
  • Digitally switched SOP
  • Switching speed 250µs or less
  • 0.1 degree SOP repeatability
  • 6-bit TTL control
  • Compact

Applications
  • Polarization OTDR
  • Performance monitoring
  • Polarization analysis
  • Swept-frequency measurement

Specifications

Insertion Loss 1.0 dB typical
Insertion Loss Variation 0.1 dB max. for all SOP States
Wavelength Dependent Loss 0.6 dB max. across C-band
Return Loss > 55 dB
Operating Wavelength 1480 ~ 1620 nm
SOP Repeatability +/- 0.1° on Poincare Sphere
Rotation Angle Wavelength Dependence -0.068°/nm
Rotation Angle Temperature Dependence 0.1 degree/ °C
Angle between SOP States 90 ħ10 degrees on Poincaré Sphere
Transient Loss 0.6 dB per bit max.
Number of Control Bits 6
SOP Switching Speed 250 µs max.
Maximum Optical Power 300 mW min.
Electrical Interface 10-pin digital port to accept any 6 bit TTL control signal, with 9V/0.6A power supply
Operating Temperature 0 ~ 50 °C
Board Dimensions 135 × 70 × 21 (L × W × H) mm


Home | Company | Products | Technical Info. | Press Release | Investor Relations | Distributors | Contact Us | Feedback

Copyright © 2000-2005 General Photonics Corporation. All rights reserved.